iDX
Closed-Loop Servo Tensioner
➤​
High speed, closed-loop DC servo tension control
➤​
Precise, stable tension with fast response and
anti-stall performance
➤​
Centralized HMI touchscreen for remote tension setting and status monitoring
➤​
Intelligent 8-segment tension settings with storage for up to
30 product recipes
➤​
Dual tension compensation for accurate and consistent
multi-unit output
➤​
Wire-break and upper/lower tension alarms with
adjustable delay
➤​
Daisy-chain networking supports up to 24 tensioners with Modbus/CANopen integration
➤​
Dedicated threading mode with tension-rod protection for safe wire threading
iDX
Connection Guide
➤​
Modbus TCP, RS485, and RS232 Communication Interfaces
➤​
Product recipe switching
via external I/O
➤​
8-segment tension switching
via external I/O
➤​
Synchronized control of up to 35 tensioners via daisy-chain connection
iH500C COMMUNICATOR
SET-UP GUIDE
-
Connect the first tensioner to the CAN Slave port of the iH500C using an RJ45 network cable. The configuration shown in the example uses a Category 7 cable.
-
Link the HMI touchscreen RS485 port to the iH5000 RS485 port.
-
Connect the RJ45 ports and power sockets of all tensioners in a daisy-chain setup.
-
Terminate the last tensioner with the supplied RJ45 matcher.
-
Link the signal port of the last tensioner to the winding machine.
*Steps are based on
image reference above
iDX
Model Dimensions
